Orroroo Project Phase 1 Drilling Completed
Released
Released
Announcement PDF
ASX:NFL
Orroroo Project
Phase 1 Drilling Completed
Date: 21st December 2023
ASX Code: NFL
Capital Structure
Ordinary Shares: 38,000,000
Unlisted Options: 9,990,000
Listed Options: 10,999,808
Performance Shares: 1,400,000
Current Share Price: 23c
Market Capitalisation: $8.74m
Cash: $3.03m (30 Sept. 2023)
Debt: Nil
Directors
Ben Phillips
Executive Chairman
• Aggressive Phase 1 drilling finished with 12 holes completed in
December 2023
• Orroroo Project prospectivity expanded with 3 new drill holes
delineating pU308
• Phase 2 drilling to commence early January 2024 to continue
work in delineating sources of uranium
• EL6814 to see initial exploration and stakeholder engagement
work commence early 2024
Leo Pilapil
Technical Director
Patrick Holywell
Non-Executive Director
Arron Canicais
Company Secretary
Contact Details
Suite 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Image 1. Uranium *peak grade occurrences delineated by Norfolk Metals via Phase 1 drilling
and February 2023 downhole geophysical survey
*peak grade(s) noted are the direct detection of pU308 over a 0.02m interval by Prompt Fission Neutron downhole logging within
a composite intersection with a cut-off grade greater than 100ppm pU308. See previous ASX announcement from 27th February
2023 regarding uranium value reported at Well 7P3 (650ppm pU308).
Norfolk Metals Limited I ABN: 38 652 438 385
1
www.norfolkmetals.com.au
ASX:NFL
Commenting on Norfolk Metals, Executive Chairman, Ben Phillips, states:
“We are extremely pleased to execute on a program with such efficiency prior to
the Christmas break and report further encouraging uranium results before taking a
short break then continuing to drill at Orroroo. The synergy between Norfolk
contractors and local stakeholders has been excellent. This first phase of drilling has
cemented the prime location of the Orroroo project with an aligned and motivated
community and company as we continue to explore the highly prospective
Walloway Basin.”
Phase 1 Drilling Completed
Norfolk Metals Ltd (Norfolk or the Company) is pleased to advise Phase 1 drilling has been
completed with 12 holes drilled across EL6552. The program commenced with the rapid drill
testing of the three known uranium occurrences at Targets 1, 2 and 4 as displayed in the
Company announcement on 9th November 2023. Norfolk’s’ primary objective for this first
phase of the program was to test the prospective palaeochannel and floodplain model. A
commitment of up to nine (9) holes across the three (3) targets was made with the Company
completing three (3) holes at Target 1 and two (2) holes each at both Target 2 and Target
4. While the direct delineation of palaeochannel(s) at the depths of the known uranium
occurrences has not yet successfully been achieved, phase two drilling will continue to test
this and the Company has gathered important information for further interpretation upon
the completion of the maiden drill program.
Towards the completion of drilling at Target areas 1,2 and 4, the second hole at Target 4
(ORMR007) was tested with a Prompt Fission Neutron (PFN) tool across the horizon of elevated
gamma returning a value of 147ppm pU308 over 0.36m with a peak reading of 796ppm
pU308. This is a positive reconfirmation of the previously reported uranium occurrence via
spectral gamma logging of historical Linc Energy drill holes (see ASX announcement 27th
February 2023).
Further Regional Uranium Occurrences Confirmed
Norfolk expanded Phase 1 of the maiden drill program, testing the previously released
regional REDOX model of the Walloway Basin (see announcement 6th July 2023) within the
approved drilling areas of EL6552. Two (2) of five (5) holes drilled returned very encouraging
results with peak values of 453ppm pU308 at ORMR008 and 538ppm pU308 at ORMR009.
These encouraging results will be further interpreted based on all lithology logging and
modelling at the end of the program.
HoleID
Easting
_GDA94
Northing
_GDA94
Max_
Depth
Depth
From
Depth
To
Thickness
(m)
Average
Grade
(ppm
pU3O8)
Max
Grade
(ppm
pU3O8)
(m)
(m)
ORMR007
276725
6382330
149
116.13
116.49
0.36
147
796
ORMR008
279676
6388816
149
100.05
100.35
0.30
102
453
ORMR009
278363
6390067
149
121.95
122.15
0.20
113
538
Table 1. Phase 1 drill collars and notable intersections with peak grade
Norfolk Metals Limited I ABN: 38 652 438 385
2
www.norfolkmetals.com.au
ASX:NFL
Note: No PFN logging completed on six (6) holes labelled ORMR001 through to ORMR006 due to either
blockage in drill hole or the nature of initial stage of program testing palaeochannel and floodplain
model. PFN logging was completed on holes ORMR010 through to ORMR012 however there are no
material results to report from these three (3) holes.
Phase 2 Drilling Commencement
Phase 2 drilling is scheduled to commence early January 2024 to see the maiden campaign
completed before the Australia Day weekend.
Engagement for EL6814 exploration
2024 will see Norfolk commence work on the exploration permit EL6814. The initial work to be
conducted over EL6814 will be planned around the results and interpretation of the maiden
drill program at EL6552. The Company remains enthusiastic on the prospectivity of the
Walloway Basin outside of EL6552 where substantial areas have had no geophysical work or
drilling completed. Stakeholder engagement has commenced with key members of the
Johnburgh community in the northern part of EL6814.
Upcoming Events (Indicative Timeline)
January 2024 – Prospectivity and target mapping across EL6552 and EL6814;
January 2024 – Commencement of Phase 2 drilling program;
January 2024 – Results of Phase 2 drill program released to market; and,
March 2024 – Comprehensive report on results and prospectivity of EL6552 and EL6814.
END
This announcement has been authorised by the board of directors of Norfolk.
Competent Persons Statement
The information in this announcement that relates to exploration results, is based on, and
fairly represents, information and supporting documentation prepared by Mr Leo Pilapil, a
competent person who is a member of the Australasian Institute of Mining and Metallurgy.
Mr Pilapil has a minimum of five years’ experience which is relevant to the style of
mineralisation and type of deposit under consideration and to the activity which he is
undertaking to qualify as a competent person as defined in the 2012 Edition of the Joint Ore
Reserves Committee Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves. Mr Pilapil is a related party of the Company, being the
Technical Director, and holds securities in the Company. Mr Pilapil has consented to the
inclusion in this announcement of the matters based on his information in the form and
context in which it appears.
About Norfolk Metals
The Roger River Project comprises two granted exploration licenses, EL20/2020, and
EL17/2021, which together cover 261km2, located 410km northwest of the capital city of
Hobart, Tasmania. The Project is prospective for gold and copper as indicated by the intense
silicification, argillisation and diatreme breccias in close proximity to the Roger River Fault
along with carbonate-rich host rocks.
Norfolk Metals Limited I ABN: 38 652 438 385
3
www.norfolkmetals.com.au
ASX:NFL
The Orroroo Uranium Project comprises two granted exploration licenses, EL6552, and
EL6814, which together cover 659km2, located approximately 274km northwest of the
capital city of Adelaide, South Australia within the Walloway Basin, which is an elongate
Tertiary Basin approximately 50km long and up to 15km wide. It consists of Tertiary and
Quaternary sediments unconformably underlain by Adelaidian basement.
For further information please visit www.norfolkmetals.com.au.
Norfolk Metals Limited I ABN: 38 652 438 385
4
www.norfolkmetals.com.au
ASX:NFL
APPENDIX 1
RAW PFN DATA
ORMR007
Depth
m
116.13
116.15
116.17
116.19
116.21
116.23
116.25
116.27
116.29
116.31
116.33
116.35
116.37
116.39
116.41
116.43
116.45
116.47
116.49
BHCed
grade %
0.0235
0
0
0.0188
0
0
0
0
0
0.0194
0
0.0489
0.0133
0.0133
0.0796
0
0
0.0171
0.0463
ORMR008
Depth
m
100.05
100.07
100.09
100.11
100.13
100.15
100.17
100.19
100.21
100.23
100.25
100.27
100.29
100.31
100.33
100.35
BHCed
grade %
0
0
0
0.0453
0
0.0324
0.0067
0.0111
0
0.0102
0.0316
0.0082
0
0.0057
0
0.0113
ORMR009
Depth
m
121.95
121.97
121.99
122.01
122.03
122.05
122.07
122.09
122.11
122.13
122.15
BHCed
grade %
0
0
0.04268
0.018667
0
0
0.053772
0.002103
0.006872
0
0
Norfolk Metals Limited I ABN: 38 652 438 385
5
www.norfolkmetals.com.au
ASX:NFL
P01
279095
6388669
150
ORMR002
P02
279097
6388646
130
ORMR003
P53
279051
6388636
138
ORMR004
P18
275791
6386143
161
ORMR005
P19
275840
6386150
155
ORMR006
P46
276719
6382347
149
ORMR007
P47
276725
6382330
149
ORMR008
D
279676
6388816
149
ORMR009
C
278363
6390067
149
ORMR010
3
276342
6389690
149
ORMR011
1
277329
6388049
149
ORMR012
1.1
277330
6388150
149
Peg_ID
Norfolk Metals Limited I ABN: 38 652 438 385
6
Max_Depth (m)
Northing_GDA94
ORMR001
Hole_ID
Easting_GDA94
DRILL COLLARS
www.norfolkmetals.com.au
JORC Code, 2012 Edition – Table 1 Report Template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code Explanation
Sampling
techniques
● Nature and quality of sampling (e.g. cut channels, random chips, or
specific specialised industry standard measurement tools
appropriate to the minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc). These examples
should not be taken as limiting the broad meaning of sampling.
● Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or
systems used.
● Aspects of the determination of mineralisation that are Material to
the Public Report.
● In cases where ‘industry standard’ work has been done this would
be relatively simple (e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was pulverised to produce a 30
g charge for fire assay’). In other cases, more explanation may be
required, such as where there is coarse gold that has inherent
sampling problems. Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant disclosure of detailed
information.
Drilling
techniques
● Drill type (e.g. core, reverse circulation, open-hole hammer, rotary
air blast, auger, Bangka, sonic, etc) and details (e.g. core diameter,
triple or standard tube, depth of diamond tails, face-sampling bit or
other type, whether core is oriented and if so, by what method, etc).
Norfolk Metals Limited I ABN: 38652 438 385
Commentary
●
Rotary mud drilling was used to obtain 2m samples in
the non-target area and 1m mud /chip samples within
the target area.
●
Downhole wireline logging using a Prompt Fission
Neutron (PFN) tool was used to calculate pU3O8from
the ratio of epithermal and thermal neutrons.
●
The PFN used in this program was calibrated using
industry standard procedures at the Australian Mineral
Development Laboratories (AMDEL) calibration facility
(Adelaide).
•
All holes were drilled by Watson Drilling with typical hole
diameter being 6” (152.4mm).
All holes were vertical.
•
www.norfolkmetals.com.au
1
Criteria
JORC Code Explanation
Drill sample
recovery
● Method of recording and assessing core and chip sample recoveries
and results assessed.
● Measures taken to maximise sample recovery and ensure
representative nature of the samples.
● Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
Logging
● Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
● Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
● The total length and percentage of the relevant intersections
logged.
Commentary
●
Caliper data show that borehole size increases in zones
of unconsolidated sands, hence all pU3O8grades were
calculated and corrected for borehole size from caliper
data taken every 5cm downhole using the equation
{2.737*({EPITHERM}/{THERMAL}-0.02)}*{-1*Power(10,06 )*Power({CAL},2)+0.0097*{CAL}-0.0313}
●
Rotary mud drilling was used to obtain 2m samples in
the non-target area and 1m mud /chip samples within
the target area.
●
All samples are geologically logged compliant with
industry standards which included lithology, mineralogy,
grain size/rounding/sorting, colour, redox
●
All samples were photographed using a high-resolution
camera.
Subsampling
techniques
and sample
preparation
● If core, whether cut or sawn and whether quarter, half or all core
taken.
● If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
● For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
● Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
● Measures taken to ensure that the sampling is representative of the
in situ material collected, including for instance results for field
duplicate/second-half sampling.
● Whether sample sizes are appropriate to the grain size of the
material being sampled.
●
The depth of investigation of the PFN tool approximately
25-40 cm radius around the borehole to allow for
accurate measurement of the ratio of
epithermal/thermal neutrons for pU3O8 calculations.
●
QA/QC of pU3O8 data included repeatability checks
by regularly logging a fibreglass-cased calibration hole
onsite at Alligator Energy (ASX:AGE) (MRC002, 723703E,
6324350N (GDA94), depth 84.5m). MRC002 has sufficient
assay data in the target zone to compare/calibrate PFN
data.
Quality of
assay data
and
● The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is
considered partial or total.
●
Three geophysical tools were used:
●
Prompt Fission Neutron Tool (PFN) serial number 22
Norfolk Metals Limited I ABN: 38652 438 385
www.norfolkmetals.com.au
2
Criteria
JORC Code Explanation
laboratory
tests
● For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and
their derivation, etc.
● Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable
levels of accuracy (ie lack of bias) and precision have been
established.
Verification
of sampling
and
assaying
Location of
data points
Data
spacing and
distribution
Commentary
manufactured by Geoinstruments Inc, Nacogdoches,
Texas. Neutron generator 78-80kV, logging at
0.5m/minute.
●
Multisurvey tool (MST) serial number 24 manufactured by
Geoinstruments Inc, Nacogdoches, Texas. Measures
16Normal, 64Long borehole resistance, Point Resistance,
and Self Potential and uncalibrated natural gamma for
depth matching.
●
GeoVista 3-arm caliper, serial number 5589, measures
the bore-hole size in millimetres for the length of the
bore hole.
●
QA/QC of pU3O8data included repeatability checks by
regularly logging a fibreglass-cased calibration hole
onsite at Alligator Energy (ASX:AGE) (MRC002,723703E,
6324350N (GDA94), depth 84.5m). MRC002 has sufficient
assay data in the target zone to compare/calibrate PFN
data.
●
Natural gamma (on the caliper tool) was used for depth
matching the PFN.
●
No wireline stretch was observed during the program
● Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
● Specification of the grid system used.
● Quality and adequacy of topographic control.
●
Drillholes are sited using a Garmin handheld GPS
●
Grid System: GDA94 Projection 53H
● Data spacing for reporting of Exploration Results.
● Whether the data spacing and distribution is sufficient to establish
the degree of geological and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation procedure(s) and
classifications applied.
●
Drill spacings chosen for the investigation were up to
kms apart (see Figure 1 of the Announcement).
●
Intercepts from the geophysics tools have been
reported for intervals >0.02m downhole thickness with
● The verification of significant intersections by either independent or
alternative company personnel.
● The use of twinned holes.
● Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
● Discuss any adjustment to assay data.
Norfolk Metals Limited I ABN: 38652 438 385
www.norfolkmetals.com.au
3
Criteria
JORC Code Explanation
Commentary
● Whether sample compositing has been applied.
an average of >100ppm pU308 for the PFN tool
●
The same parameters have been applied for the
aggregate intercepts. Internal dilution of continuous
zero readings no greater than 0.1m in downhole length
has been included in the composite calculations.
Orientation
of data in
relation to
geological
structure
● Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering
the deposit type.
● If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
●
The mineralisation is interpreted to be contained in clay
sediments.
●
All drillholes are vertical which is appropriate for the
orientation of the mineralisation.
Sample
security
● The measures taken to ensure sample security.
●
All samples are kept under locked security while logging
is completed to then be stored at an adequate facility
in Adelaide.
Audits or
reviews
● The results of any audits or reviews of sampling techniques and data.
●
No audits or reviews undertaken of sampling techniques
to date.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral
tenement and
land tenure
status
JORC Code Explanation
● Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
● The security of the tenure held at the time of reporting along with
any known impediments to obtaining a licence to operate in the
Norfolk Metals Limited I ABN: 38652 438 385
Commentary
●
The Orroroo Project is located on exploration licenses
EL6552 and EL6814 which are held 100% by Norfolk
●
Continual engagement with the Department of Mining
and Energy in South Australia, local heritage groups and
stake holders is required and overseen by Norfolk
management
www.norfolkmetals.com.au
4
Criteria
JORC Code Explanation
Commentary
area.
Exploration
done by other
parties
● Acknowledgment and appraisal of exploration by other parties.
●
Linc Energy drilled a series of wells exploring for coal and
gas in the Walloway Basin (EL6552). The company used
downhole wireline gamma spectrometry to determine
locations of possible hydrocarbon traps.
Geology
● Deposit type, geological setting and style of mineralisation.
●
Walloway Basin, which is an elongate Tertiary Basin
approximately 50km long and up to 15km wide. It
consists of Tertiary and Quaternary sediments
unconformably underlain by Adelaidian basement.
●
Within the Tertiary two lithological units have been
recognised, a lower interbedded fluvial sand, silt and
clay, and an upper, more extensive and continuous
lacustrine unit of grey, brown and black clay. Both
consist of unconsolidated sediments and multiple
aquifers, one of which may be artesian. The lower unit
contains a known coal seam (Walloway Seam) of Lignite
B rank.
●
The Walloway basin has no known uranium source
defined in the nearby ranges and outcrops. However,
the Walloway basin is underlain by granitic basement
rocks which could possibly be the source of mobilized
uranium. Another possible source may be the Brighton
Limestone (known to have low levels of uranium) of the
South Flinders Ranges located to the west of the
tenement.
●
Drill hole information used in the geophysics survey is
shown in Table 1 of this announcement.
Drill hole
Information
● A summary of all information material to the understanding of the
exploration results including a tabulation of the following
information for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
Norfolk Metals Limited I ABN: 38652 438 385
www.norfolkmetals.com.au
5
Criteria
JORC Code Explanation
Commentary
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
● If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should
clearly explain why this is the case.
Data
aggregation
methods
● In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material and should be
stated.
● Where aggregate intercepts incorporate short lengths of highgrade results and longer lengths of low grade results, the
procedure used for such aggregation should be stated and some
typical examples of such aggregations should be shown in detail.
● The assumptions used for any reporting of metal equivalent values
should be clearly stated.
●
Intercepts from the geophysics tools have been
reported for intervals >0.02m downhole thickness with an
average of >100ppm pU308 for the PFN tool
●
The same parameters have been applied for the
aggregate intercepts. Internal dilution of continuous
zero readings no greater than 0.1m in downhole length
has been included in the composite calculations.
●
The pU308 readings from the PFN tools have been
included in the Appendix of the announcement.
Relationship
between
mineralisation
widths and
intercept
lengths
● These relationships are particularly important in the reporting of
Exploration Results.
● If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
● If it is not known and only the down hole lengths are reported,
there should be a clear statement to this effect (e.g. ‘down hole
length, true width not known’).
●
For the historical Linc Energy drilling, no drilling intercepts
reported
●
For the PFN survey the uranium occurrence widths are
considered close to true widths due to the generally flat
lying orientation of the mineralisation and the use of
perpendicular vertical drilling
Diagrams
● Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
●
Drill hole locations regarding the geophysics survey is
shown in Figure 1 of this announcement.
Balanced
reporting
● Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practised to avoid misleading reporting
●
The accompanying document is a balanced report with
a suitable cautionary note.
Norfolk Metals Limited I ABN: 38652 438 385
www.norfolkmetals.com.au
6
Criteria
JORC Code Explanation
Commentary
of Exploration Results.
Other
substantive
exploration
data
● Other exploration data, if meaningful and material, should be
reported including (but not limited to): geological observations;
geophysical survey results; geochemical survey results; bulk
samples – size and method of treatment; metallurgical test results;
bulk density, groundwater, geotechnical and rock characteristics;
potential deleterious or contaminating substances.
●
All meaningful information provided.
Further work
● The nature and scale of planned further work (e.g. tests for lateral
extensions or depth extensions or large-scale step-out drilling).
● Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling
areas, provided this information is not commercially sensitive.
●
Further geophysics investigation and drilling will assist in
delineating the potential paleochannels possibly
containing uranium mineralization.
Norfolk Metals Limited I ABN: 38652 438 385
www.norfolkmetals.com.au
7
Share your feedback
Discover