Clarification Announcement
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
ABN: 38 652 438 385
Phone: +61 8 6255 8625
norfolkmetals.com.au
ASX: NFL 12 November 2025
Clarification Announcement
Norfolk Metals Limited (ASX:NFL) (Company) lodged an ASX release on 30th
October 2025, titled “RC Drilling
Expanded and New Targets Identified”. The release has been updated and forms part of this announcement.
The original release contained disclosure of visual mineralisation (Image 1-4), which did not include disclosure in
accordance with ASX Listing Rules and ASX Compliance update #04/23. This clarification announcement now
incorporates the relevant disclosure as required by ASX Listing Rules and references to prior announcements.
This announcement has been approved and authorised for release by the board of directors of Norfolk
Metals Limited.
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
ASX:NFL 30th
October 2025
RC Drilling Expanded and New Targets Identified
• Norfolk continues to advance the Maiden RC and DDH drilling program, currently drilling the
30th of up to 50 planned holes; the RC program phase is expected to conclude with 34 holes
and all remaining holes will be DDH.
• The RC drilling is now concentrating on confirming historical holes along the Tabaco Thrust
to validate higher-grade historical intercepts. This work has been brought forward from the
confirmatory collars planned for the DDH component.
• Higueritas Belt access and reconnaissance mapping has identified areas exhibiting visible
copper oxides outcrops spatially associated with structures and coincident with a strong IP
chargeability anomaly. Surface sampling of the observed oxide mineralisation has been
conducted and sent for analysis along with two RC holes planned for immediate drilling.
• Several historic 2006 IPBX diamond holes have been selected to be quarter cut for re-assay
to confirm historic intersections for copper & gold grades. Some of the intervals to be re-
assayed include the following:
High-grade oxide intervals inside the Carmen NI 43-101 MRE;
• TAB 26: 31m @ 1.21% Cu (from 24m)
• TAB 33: 27.5m @ 1.12% Cu (from 1.5m), incl. 11.5m @ 1.88% Cu
• TAB 41: 19.4m @ 0.61% Cu (from 4.6m), incl. 7.4m @1.45% Cu
• TAB 82: 4m @ 3.67% Cu (from 20m), incl. 2m @ 7.22% Cu
High-grade sulphide intervals below the Carmen NI 43-101 MRE;
• TAB 23: 26m @ 1.58% Cu (from 29m)
• TAB 83: 63m @ 1.45% Cu (from 45m), incl. 24m @ 2.15% Cu & 14m @ 1.77% Cu
• TAB 31: 52m @ 0.92% Cu (from 66m)
• The Project hosts a historical copper oxide mineral resource estimate of 5.6Mt at 0.6% Cu
reported in accordance with Canadian National Instrument 43-101 (Carmen NI 43-101 MRE)1,2
1
Independent Technical Report prepared by SRK Consulting Chile S.A. (SRK) for International PBX Ventures Ltd. (IPBX) published 25 January
2027 (Carmen NI 43-101 MRE).
2
The Carmen NI 43-101 MRE is a historical foreign estimate (within the meaning of the ASX Listing Rules) and is not reported in accordance with
the JORC Code and a Competent Person (within the meaning of the JORC Code) has not done sufficient work to classify the foreign estimates as
Mineral Resources in accordance with the provisions of the JORC Code. It is uncertain that following evaluation and further exploration work that
the foreign estimates will be able to be reported as Mineral Resources in accordance with the provisions of the JORC Code.
2
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Norfolk’s Executive Chairman, Ben Phillips, comments;
“The RC drilling phase is edging towards completion with the inclusion of previously planned DDH collars to be drilled
within the RC phase. These new RC collars include important confirmatory drilling. The re-analysis of historical high
grade intercept diamond core, including gold analysis, has also commenced. The historical drill core selected for re-
analysis had no previous gold analysis work conducted, so we look to add potential value to the Carmen Project. The
Higueritas Belt is somewhat of the sleeping giant within the project area, given the limited historical work and no
historical drilling; yet the belt displays many analogous signatures to Carmen Main and the Carmen-Tobaco Fault,
including oxide mineralisation at surface with several outcrops and old copper mining workings.”
InvestorHub
Investors are also encouraged to join and engage through the Norfolk Metals InvestorHub, post questions and
feedback through the Q&A function accompanying each piece of content, and engage directly with the Norfolk team.
Maiden Drilling Program
The 2025 Maiden drilling program continues with 29 of the updated 34 planned RC holes completed (2,176 m of
2,510m planned meters completed). The RC drilling is being performed on an 8 hour day shift . Up to 15 Diamond
Drill Holes (DDH) are planned for 2,575m to commence after the RC drilling Maiden Drill Campaign has been
completed and results assessed. Diamond drilling will be performed continuously over 24 hours (Figure 1). The
Company notes that this announcement contains no new material exploration results. Any reference to grades or
intercepts relates solely to historical drilling results previously announced to the ASX.
Figure 1: Drill Location Plan showing location of RC drill holes CCRC-25-001 through CCRC-25-029
(All assays and grades displayed from historical drilling)
3
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Several planned drill collars from the DDH program have been brought forward into the RC phase of drilling to
expedite the confirmatory drilling of historical high-grade intercepts. There has also been two RC holes planned in
the project expansion area of the Higueritas Belt. It is now expected the Company will release all RC drill assays once
the complete dataset of RC drilling has been received, interpreted, presented on map and section with relevant JORC
reporting requirements later this quarter.
SECTION 10,000NE
The RC drilling on the western side of Section 10,000NE has been planned to validate historical drilling and to test
the higher-grade zone located on the hanging wall of the Tabaco Thrust (all grades and intervals referenced are from
historical drilling results previously reported by the Company). From historical drilling, this area represents the
highest Cu grade distribution observed in Carmen Main and possibly relates to the structural dilational jogs
(thickening of the favorable rhyolite/intrusive host) along Tabaco Thrust (Figure 2).
Figure 2: Section 10,000NE looking NE
(All assays and grades displayed from historical drilling)
Higueritas Belt
Access to the Higueritas Belt from Carmen Main has been established. The Higueritas Belt is 7.5km long, from 0.5 to
1km wide and sub parallels the Carmen-Tabaco Belt. There has been limited historical work conducted over this
area. Initial access and prospecting in the northern part of the Higueritas Belt has resulted in the identification of
several old copper workings which appear to be associated with NE/SW and N/S striking structures approximately
2.5 km to the south east of the Carmen Main area and constrained by two NW to NNW striking district faults (Figures
3 & 4).
Strong copper oxide mineralisation along a mapped N/S to NNE structure in volcanic breccia host (Image 1, Figure
5) appears to correlate well with the strong IP anomaly at250m depth over this portionof the belt. Twleve(12) channel
chip samples across structures and four (4) panel chip samples over outcrop have been collected and sent to ALS
for analysis (Images 2-4, Higueritas Belt Channel Chip and Panel Chip Reference Table). Assays from this sampling
program will be reported within 2 months of this release date. Two RC drill holes with a proposed depth of 150m each
have been planned to test a) below the surface mineralisation across the mineralised breccia host, and b) the top of
the IP anomaly. A follow up diamond drill has also been planned to test the large coincident IP anomaly over this area
over the 200m wide breccia host (Figures 6 & 7).
4
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Higueritas Belt Channel Chip and Panel Chip Reference Table
(See “Legend – Geological Acronyms” at rear of announcement)
Mapping and geochemical soil sampling have been planned to define drill targets for the subsequent drilling
campaigns. There are 4 distinct strong IP anomalies from 0.5-1.5km in strike length along the belt, totalling around
5km in total strike length.
0.00 2.00 EX00001 365360.00 6825238.00 2015.00 75 0
x
2.00 4.00 EX00002 90 0
x
4.00 6.00 EX00003 135 0
x
6.00 8.00 EX00004 170 0
x
8.00 10.00 EX00005 200 0
x
EX00006 365368.00 6825195.00 2010.00
x
EX00007 365380.00 6825188.00 2017.00
x
EX00008 365414.00 6825190.00 2027.00
x
0.00 2.00 EX00009 365383.00 6825174.00 2015.00 100 0
x
2.00 4.00 EX00010 110 0
x
4.00 6.00 EX00011 100 0
x
EX00012 365374.00 6825239.00 2019.00
x
0.00 2.00 EX00013 365341.00 6825085.00 2013.00 285 (+)5
x
0.00 2.00 EX00014 365338.00 6825083.00 2012.00 305 (+)5
x
2.00 4.00 EX00015 320 (+)5
x
4.00 6.00 EX00016 285 (+)5
x
Fine-grained Andesitic rock, aphanitic/welded texture, green
color. Calc-silicate alteration(++ca+chl+ep±sil). Mod calcite filling
fractures. Cx 1~2%frc, c-w 0.1%frc, hm 0.1%diss/frc, mx 0.5%frc
Fine-grained volcanic Andesite, aphanitic/welded texture. Green
color. Calc-silicate alteration frc/mt(++ep+ca+chl±sil).
Ep+sc+cx±ca vlts/frc(7~10/m). Cx 0.5%frc, c-w 0.1%frc, sc
0.5~1%frc/vlt, mx 0.1%frc
Fine-grained volcanic Andesite, aphanitic/welded texture. Green
color. Calc-silicate alteration frc/mt(++ep+ca+chl±sil).
Ep+sc+cx±ca vlts/frc(15~20/m). Cx 0.5%frc, c-w 0.1%frc, sc
0.5~1%frc/vlt, mx 0.1%frc
Fine-grained volcanic Andesite, aphanitic/welded texture. Green
color. Calc-silicate alteration frc/mt(++ep+ca+chl±sil).
Ep+sc+cx±ca vlts/frc(7~10/m). Cx 0.5%frc, c-w 0.1%frc, sc
0.5~1%frc/vlt, mx 0.1%frc
Fine-grained volcanic Andesite, aphanitic/welded texture. Green
color. Calc-silicate alteration frc/mt(++ep+ca+chl±sil).
Ep+sc+cx±ca vlts/frc(5~7/m). Cx 0.5%frc, c-w 0.1%frc, sc
0.5~1%frc/vlt, mx 0.1%frc
Fine-grained Andesitic rock, green color. Calc-silicate alteration
related to mtx/frc. Cx 1%frc/clt, c-w 1%frc. mgt 0.5%diss, mx
0.5%frc. Pannel sample 1x1m
Fine-grained Andesitic rock, green color. Calc-silicate alteration
related to mtx/frc. Cx 1%frc/clt, c-w 1%frc. mgt 0.5~1%diss, mx
1%frc, fx 0.5~1%frc. Pannel sample 1x1m
Matrix-supported polymictic breccia(volcanic breccia), sub-
angular fragments(1-5cm diameter) . Weak calc-silicate alt
related to some fractures. Mx 1%frc, fx 0.1%frc. Pannel sample
1x1m
Fine-grained Andesitic rock(meteorized), green color. Calc-silicate
alteration(++ca+chl+±ep), Mod calcite related to frc. C-w
1%frc/diss, cx 1%frc, mx 2%frc, fx 1%frc. Channel sample 2m
length
Fine-grained Andesitic rock(meteorized), green color. Calc-silicate
alteration(++ca+chl+±ep), Mod calcite related to frc. C-w
1%frc/diss, cx 1%frc, mx 2%frc, fx 1%frc. Channel sample 2m
length
Fine-grained Andesitic rock(meteorized), green color. Calc-silicate
alteration(++ca+chl+±ep), Mod calcite related to frc and vlts. C-w
1%frc/diss, cx 0.5%frc, mx 2%frc, fx 1%frc. Channel sample 2m
length
Fragment supported breccia, with sericite(matrix) and calc-
silicate alt related to bxm. Mineralized by Cx ~1%bxm/frc, c-w
0.1~0.5% bxm/frc, mx 0.5%frc. Chip channel(2m), cross-
cutting(little bit oblique) mineralized structure.(This sample has
the start utm)
Fragment supported breccia, with sericite(matrix) and calc-
silicate alt related to bxm. Mineralized by Cx ~1%bxm/frc, c-w
0.5~1% bxm/frc, mx 0.5%frc. Chip channel(2m), cross-
cutting(little bit oblique) mineralized structure.
Fragment supported breccia, with sericite(matrix) and calc-
silicate alt related to bxm. Mineralized by Cx 0.5%bxm/frc, c-w
0.5~1% bxm/frc, mx 0.5%frc. Chip channel(2m), cross-
cutting(little bit oblique) mineralized structure.
Fragment supported breccia, with sericite(matrix) and calc-
silicate alt related to bxm. Mineralized by Cx 1%bxm/frc, c-w 1%
bxm/frc, mgt 1%diss, mx 0.5%frc. Chip channel(2m), cross-
cutting(little bit oblique) mineralized structure.
Fragment supported breccia, with sericite(matrix) and calc-
silicate alt related to bxm, calcite frc-related. Mineralized by Cx
0.1%bxm/frc, c-w 1% bxm/frc, mgt 0.1%diss, mx 1%frc, sc
0.5%clt. Chip channel(2m), cross-cutting(little bit oblique)
mineralized structure.
Easting Northing RL
Azimuth(0-360°)
Dip(0±90°)
Rock
chip
Chip
channel
Channel
Comments
From To Sample Cod.
UTM(wgs 84_19S) Sample Dir. Sampling method
Pannel
Bulk
5
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Figure 3: Regional Geology showing the spatial relationship of the Carmen-Tabaco and Higueritas Belts.
6
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Figure 4: Regional IP showing the structural relationship of the Carmen-Tabaco and Higueritas Belts. Refer
ASX release 12 May 2025.
Figure 5: Plan Map of Higueritas E-1 Proposed diamond hole with IP Chargeability anomaly with locations
of surface Channel and Rock chips taken across historic working and outcrop of andesite breccia. Refer
ASX release 12 May 2025.
7
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Image 1: Higueritas Belt sample with strong copper oxide mineralisation in volcanic breccia host
Cautionary Statement – Visual Mineralisation: Visual observations of mineralisation are qualitative in nature. They do not
provide information on grade or quantity and should not be considered indicative of mineral content. Laboratory assays are
required to determine grades. Assay results for the surface samples shown in these images are pending and will be reported
in accordance with the JORC Code (2012).
Figure 6: Regional IP of the Carmen-Tabaco and Higueritas Belts showing location
of proposed regional holes including the “E-1” proposal at Higueritas. Refer ASX
release 12 May 2025.
8
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Figure 7: Chargeability and Resistivity anomalies at 250m vertical depth on IP Section Line 6000N
at the Higueritas E-1 Target. Refer ASX release 12 May 2025.
Image 2: Cu Oxide on NNE striking structure in the Higueritas E-1 target area.
Cautionary Statement – Visual Mineralisation: Visual observations of mineralisation are qualitative in nature. They do not
provide information on grade or quantity and should not be considered indicative of mineral content. Laboratory assays are
required to determine grades. Assay results for the surface samples shown in these images are pending and will be reported in
accordance with the JORC Code (2012).
9
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Image 3: Panel sampling over 2m x 2m across mineralized outcrops
Cautionary Statement – Visual Mineralisation: Visual observations of mineralisation are qualitative in nature. They do not
provide information on grade or quantity and should not be considered indicative of mineral content. Laboratory assays are
required to determine grades. Assay results for the surface samples shown in these images are pending and will be reported in
accordance with the JORC Code (2012).
Image 4: Extensive Cu Oxide mineralization in fractured outcrop volcanic breccia host
Cautionary Statement – Visual Mineralisation: Visual observations of mineralisation are qualitative in nature. They do not
provide information on grade or quantity and should not be considered indicative of mineral content. Laboratory assays are
required to determine grades. Assay results for the surface samples shown in these images are pending and will be reported in
accordance with the JORC Code (2012).
10
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Additional information required under the JORC Code (2012), including Sections 1 and 2 of Table 1 for the newly reported
Higueritas rock-chip sampling and field observations, is provided in Annexure B.
Re-analysis of Historical Drill Core High Grade Intercepts
Several historic 2006 IPBX DDH drill holes have been selected for re-logging and re-cutting into quarters for copper
and gold re-analysis. The holes have been selected to validate higher grade historical Cu Oxide and Cu Sulphide
intercepts of the Carmen Main mineralisation. The higher priority holes selected are as follows:
High-grade oxide intervals inside the Carmen NI 43-101 MRE;
• TAB 26: 31m @ 1.21% Cu (from 24m)
• TAB 33: 27.5m @ 1.12% Cu (from 1.5m), incl. 11.5m @ 1.88% Cu
• TAB 41: 19.4m @ 0.61% Cu (from 4.6m), incl. 7.4m @1.45% Cu
• TAB 82: 4m @ 3.67% Cu (from 20m), incl. 2m @ 7.22% Cu
High-grade sulphide intervals below the Carmen NI 43-101 MRE;
• TAB 23: 26m @ 1.58% Cu (from 29m)
• TAB 83: 63m @ 1.45% Cu (from 45m), incl. 24m @ 2.15% Cu & 14m @ 1.77% Cu
• TAB 31: 52m @ 0.92% Cu (from 66m)
Image 5**: TAB-023 showing typical sulphide mineralogy to be re-assayed for CuT and Au
Image 6**: TAB 031 showing flow banded meta-sediment containing mainly Cu sulphides (Chalcopyrite) and
minor pyrite
11
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Image 7: Example of quarter core samples to be re-submitted for analysis
**The assay grade represented in Images 5 and 6 are from the 2m composite half-core sample interval submitted to ALS-
Chemex Coquimbo, Chile. Please see Table 2 of the JORC Table in the NFL release dated 31st
March 2025 for details.
12
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Carmen Copper Project
The Carmen Copper Project is in the Huasco Province, Atacama Region in Chile, which is currently the world's largest
copper producing nation**. The Project encompasses twenty-two contiguous exploration and exploitation licenses
totalling 46.6km2
(Figure 8).
The Carmen-Tabaco Belt is 8.5km long and most Cu ± Ag Au mineralisation is spatially related to NE/SW, N/S and
NW trending structures and fractured host rocks at surface, and in the old workings. Mineralisation is mainly hosted
in calc-silicate altered and locally skarnified volcanics, meta-sediments and dacitic porphyritic bodies and includes
copper and silver (oxide and sulphide) mineralization accompanied by low-grade gold.
A younger epithermal style of quartz-sericite alteration and copper-gold locally overprints the Meta-sediments,
hornfels and hematised andesite in the vicinity of the Tabaco, Carmen and Dolores Sectors. In these areas, high-
grade poly-metallic veins and shears occur in the historic workings, which are generally 1-3m wide.
Figure 8: Carmen Cu Project Location in Huasco Province of Atacama Region in northern Chile
**https://www.nasdaq.com/articles/top-10-copper-producers-country.
Please refer to Annexure A for information relating to the mineral resources and reserves classifications for each of the Mantos
Blancos Mine, Mantoverde Project and Candelaria Copper Mining Complex, which have been previously reported in accordance
with NI 43-101 standards.
This announcement has been authorised by the directors of Norfolk Metals.
13
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Competent Person Statement
The information in this announcement that relates to Exploration Results, including field observations and surface
rock-chip sampling at the Higueritas Belt, is based on and fairly represents information compiled by Mr Leo Pilapil,
who is a member of the Australasian Institute of Mining and Metallurgy and a Technical Director of Norfolk Metals
Limited.
Mr Pilapil has sufficient experience relevant to the style of mineralisation and type of deposit under consideration
and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code).
Mr Pilapil has reviewed and consents to the inclusion in this announcement of the matters based on his information
in the form and context in which they appear.
Additional information required under the JORC for the newly reported rock-chip sampling and field observations is
included in Annexure B.
Assay results for the current drilling and surface sampling program remain pending and will be reported once
laboratory analyses are received.
The announcement references material from the below prior ASX releases:
31st
March 2025 - Norfolk to earn-into Chilean Copper Project
12th
May 2025 - Carmen Copper Project Maiden Drill Campaign Update
Forward Looking Statements
This announcement includes “forward looking statements” within the meaning of securities laws of applicable
jurisdictions. Forward looking statements can be identified by the use of forward looking terminology, including,
without limitation, the terms “believes”, “estimates”, “anticipates”, “expects”, “predicts”, “intends”, “plans”, “goals”,
“targets”,“aims”,“outlook”,“guidance”,“forecasts”,“may”,“will”,“would”,“could”or“should”or, in each case, their
negative or other variations or comparable terminology. These forward looking statements include all matters that
are not historical facts. By their nature, forward looking statements involve known and unknown risks, uncertainties
and other factors because they relate to events and depend on circumstances that may or may not occur in the
future and may be beyond the Company’s ability to control or predict which may cause the actual results or
performance of the Company to be materially different from the results or performance expressed or implied by such
forward-looking statements. Forward looking statements are based on assumptions and are not guarantees or
predictions of future performance. No representation is made that any of these statements or projections will come
to pass or that any forecast result will be achieved, nor as to their accuracy, completeness or correctness. Similarly,
no representation is given that the assumptions upon which forward looking statements may be based are
reasonable. Forward looking statements speak only as at the date of this release and the Company and its affiliates,
related bodies corporate (as that term is defined in the Corporations Act) and its directors, employees, officers,
representatives, agents, partners, consultants and advisers disclaim any obligations or undertakings to release any
update of, or revisions to, any forward-looking statements in this announcement.
Disclaimers
This announcement has been prepared by Norfolk Metals Limited (ACN 652 438 385) (the Company). The
information contained in this release is for information purposes only. This release may not be reproduced,
disseminated, quoted or referred to, in whole or in part, without the express consent of the Company. The information
contained in this release is not investment or financial product advice and is not intended to be used as the basis for
making an investment decision. Please note that, in providing this release, the Company has not considered the
objectives, financial position or needs of any particular recipient. The information contained in this release is not a
substitute for detailed investigation or analysis of any particular issue and does not purport to be all of the
information that a person would need to make an assessment of the Company or its assets. Current and potential
investors should seek independent advice before making any investment decisions in regard to the Company or its
activities.
No representation or warranty, express or implied, is made as to the fairness, accuracy, completeness or correctness
of the information, opinions and conclusions contained in this release. To the maximum extent permitted by law,
14
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
none of the Company, its related bodies corporate, shareholders or respective directors, officers, employees, agents
or advisors, nor any other person accepts any liability, including, without limitation, any liability arising out of fault or
negligence for any loss arising from the use of information contained in this release.
This release does not constitute an invitation, offer or recommendation to apply for or purchase securities and does
not contain any application form for securities. This release does not constitute an advertisement for an offer or
proposed offer of securities. Neither this release nor anything contained in it shall form the basis of any contract or
commitment and it is not intended to induce or solicit any person to engage in, or refrain from engaging in, any
transaction.
15
ASX ANNOUNCEMENT
Unit 10, 85-87 Forrest Street
Cottesloe WA 6011
Phone: +61 8 6255 8625
norfolkmetals.com.au
Legend – Geological Acronyms
Annexure A – NI 43-101 - Mineral Resources and Reserves
Compliance Statements (information required by ASX Listing Rule 5.13)
The Mineral Resource Estimate at the Carmen Copper Project is a foreign estimate prepared in accordance with
Canadian National Instrument 43-101 and is not reported in accordance with the JORC Code 2012. A competent
person has not done sufficient work to classify the foreign estimate as a mineral resource in accordance with the
JORC Code 2012, and it is uncertain whether further evaluation and exploration will result in an estimate reportable
under the JORC Code 2012.
The Company initially announced the foreign estimate for the Carmen Copper Project on 31 March 2025 in
accordance with ASX Listing Rule 5.12. The Company confirms that the supporting information included in the
announcement of 31 March 2025 continues to apply and has not materially changed. The information in this section
relates solely to the foreign estimate previously disclosed under ASX Listing Rule 5.12 and does not constitute new
exploration results.
Norfolk confirms that it is not in possession of any new information or data relating to the foreign estimate that
materially impacts the reliability of the estimates or Norfolk’s ability to verify the foreign estimates as mineral
estimates in accordance with Appendix 5A (JORC Code).
1. VOLCANIC ROCKS 3. CLAST TYPE 1. METAMORPHIC ROCKS 1. ALTERATION TYPE
Volcanic (undiff) V Crystal xl Metamorphic (undiff) M Meta-Conglomerate MCG Adularia Silica ADS Intense >30% 5 Fault FLT Rodding RDD
Rhyolite VR Lithic (volcanic) lt Amphibolite MAM Meta-Greywacke MGW Advanced Arg AAR Strong 15 - 30% 4 Fault Zone FLZ Schistosity SCH
Dacite VD Pumice pu Banded Iron Form MBF Meta-Pelite MPL Amphibolitization AMB Moderate 5 - 15% 3 Oxide OX Mixed Supergene-Hypo S-H Normal Fault NFT Mylonitization MYL
Andesite VA Basement Fragments bf Black Schist MBS Meta-Quartz Arenite MQA Argillic ARG Weak 1 - 5 % 2 Transition TR Hypogene HY Reverse Fault RFT Bedding BDG
Basalt VB 4. CLAST SIZE Calc-silicate MCS Meta-Sediment (undiff) MSU Biotitiization BIO Trace <1% 1 Supergene SG Sinistral Strike-Slip Fault SFT Boudinage BOU
Komatiite VK <2mm Ash a Cataclasite MCC Meta-Volcanic (undiff) MVU Calcification CAL Unaltered 0 Dextral Strike-Slip Fault DFT Cleavage CLE
Volcanic Glass VG 2-64mm Lapilli l Contact Hornfels MHF Meta-Volcanic - Acid MVA Carbonatisation CRB Boxwork BXW Replacement REP Thrust THR Spaced Cleavage CLS
Latite VL >64mm Breccia b Gneiss MGN Meta-Volcanic - Basic MVB Decalcification DCC Clasts CL Breccia Clasts BXC Sheeted Veins SHV Structure (undiff) STR Foliation FOL
Trachyte VT 5. TEXTURES Gneiss - Granitic MGG Meta-Volcanic - Inter MVI Dolomotization DOL Crackle Breccia CX Breccia Matrix BXM Silicification SIL Slickensides SKS Flow Banding FLB
Phonolite VP Vesicular v Gneiss - Ortho MGO Migmatite MMG Hornfels HNF Fractures FR Crackle Breccia CBX Skarn SKN Shear SHR Fold Axis FLD
2. MODE Welded w Gneiss - Para MGP Mylonite MMY HydroTherm Alt (Undiff) HYD Leaching LC Disseminated DSM Stockwork STK Shear Zone SZN Jointing JNT
Lava LV Flow Banding bn Graphitic Schist MSG Phyllite/Slate MPT Kaolinization KAO Matrix MT Clotty/Irregular Masses CLT Stringer STG Fracture FRA Lineation LIN
Tuff TF Bedded bd Hornblendite MHB Schist MST Limey Clay LCL Overprinting OP Fracture Coatings FRC Structure STR Fracture Zone FRZ Vein VEN
Ignimbrite IG Porphyritic po Marble MLS Serpentinite MSP Manganese Halo MNH Patchy PA Gossan GOS Sulphide Breccia SBX Stockwork Zone SWZ Veinlets VLT
Laharic Breccia LB Meta-Chert MCT Talc Rock MTC Micro-quartz Alteration MCQ Pervasive PV Manto MTO Vein VEN Topographic Lineament TLN Vein Zone (sheeted?) VZN
Volcanoclastic VC Meta-Diorite MID Opalization OPL Phenocrysts PH Massive Sulphide MSB Vein Breccia VBX Subcrop Lineament SCL Dike DYK
1. HYPABYSSAL ROCKS 2. MODE 3. MINERALS/COMPOSITION 5. TEXTURES Phyllic PHY Replacement RP Matrix MTX Veinlets VTS General Contact CON Dikelets DYL
Hypabyssal (undiff) H Dyke dk Actinolite ac Banded bn Potassic POT Selective SL Patchy PAT Vugs VGS Company Drill Hole DH-C
Rhyolite HR Sill sl Andalusite al Folded fl Propylitic PRP Stratabound SB Pervasive Staining PST Third Party Drill Hole DH-T
Dacite HD Stock st Basic bs Massive ms Quartz-Alunite QAL Structure Controlled ST 2. QUARTZ VEIN STYLE Weak 1
Andesite HA Dome dm Biotite bi Porphyroblasts pb Saprolite SAP Vein / Veinlets VN Banded/Crustiform QCF Cross-cutting phases QXC Poor P Mod 2
Basalt HB Batholith bl Chlorite ct Schistose sh Sericitization SER Vein Selvage VS Bladed Carbonate textures QBT Dog-tooth Carb Texture QDT Medium M Strong 3
Komatiite HK Lopolith lp Cordierite cd Spinifex sx Serpentiniz
Share your feedback
Discover